UK Traffic Lights Explained: The Definitive Guide
You must obey any direction from a police officer or other authorised person. Signs may be placed with signals to qualify the meaning of the full green signal where movements through a junction are restricted. Take extra care if you intend to turn left or right, and give way to pedestrians who are crossing.
Light signals used to control traffic, including traffic light signals, flashing red lights, motorway signals and lane control signals. Dealing with a traffic light failure can be daunting for a learner driver. If you find yourself in this position, you must treat the junction or crossroads as unmarked. With an unmarked junction, nobody has priority (see types of junctions for further information).
Never remain inside the junction as you will stop the flow of traffic. A turning vehicle always has to give way to pedestrians who are crossing the road they are turning into, even if the pedestrian is not facing a green ‘walking figure’. Also give way to any vehicles using a bus lane, cycle lane or tramway from either direction.
You must proceed slowly and with caution and only continue when safe to do so. Advanced stop lines such as the images above allow for cyclists to stop ahead of other vehicles in a bay often in a alternative colour to the road. All traffic must stop at the first line when the lights are red and avoid entering the cycle bay when stationary. Do not enter that lane unless you want to go in the direction of the arrow.
Green filter light illuminated
It is also relatively common for a learner driver to focus primarily on the red light and not notice the green filter light is illuminated allowing you to proceed. A filter light may illuminate before or after the full green phase. Ensure you keep an eye on the filter light as well as the main phase lights.
Light signals for the control of pedal cycles (alternative types). RED, AMBER and GREEN have the same meanings as at other traffic signals. If a green arrow is shown with a red signal and the way is clear, you may go, but only in the direction shown by the arrow.
- You should stay on the approach side until you see a big enough gap in your lane on the other side.
- It is also relatively common for a learner driver to focus primarily on the red light and not notice the green filter light is illuminated allowing you to proceed.
- At some intersections, you’ll encounter traffic lights with an additional green filter arrow.
When a red and amber light appear at the same time, this indicates that the lights are about to turn green. Motorists can prepare to go, but they should not pass through until a green light appears. If a red light appears on the traffic lights, it’s a mandatory instruction that you must come to a complete stop behind the stop line. Under no circumstances should vehicles attempt to proceed or cross the line while the red light is visible. Failing to comply with a red traffic light is a serious offence that can result in penalty points, fines, and even prosecution in serious cases.
You may proceed in the direction of the green arrow when it, or the full green light shows. Give other traffic, especially cyclists, time and room to move into the correct lane. If you are waiting to turn right and the red light illuminates, ensure you exit the junction by turning right when the remaining oncoming vehicles have dispersed.
Box junctions
However, many traffic lights do, especially at high-risk or busy junctions. These cameras help to improve road safety by capturing and recording vehicles that speed or run through a red light. These have criss-cross yellow lines painted on the road. You MUST NOT enter the box until your exit road or lane is clear. However, you may enter the box and wait when you want to turn right, and are only stopped from doing so by oncoming traffic, or by other vehicles waiting to turn right. If the traffic lights are not working or out of order, no one has priority and the junction should be treated as an unmarked crossroad.
A directional green filter arrow means that you have priority over traffic as their lights will be on red when you make the turn. As with all junctions be aware of pedestrians and cyclists whilst making the turn. Just because you have priority, there is a possibility of another vehicle, cyclist or pedestrian crossing or being where they shouldn’t be. Although understanding traffic the light sequences is reasonably simple, greater challenges often arise when dealing with other road users and pedestrians at traffic lights. It is of course important to obey traffic light signals, but equally important to have a constant awareness of what is around you. Cyclists and pedestrians in particular can be unpredictable around busy light controlled junctions.
When approaching traffic lights, you should watch them carefully and ensure you are positioned in the correct lane, depending on where you intend to go. If a red light appears, you must stop at the line and wait for the green light before moving off. If a steady amber light appears, you should prepare to stop, but if you are close or about to pass the stop line, you can proceed.
Although you may turn right on a full green signal, a right-turn GREEN ARROW showing at the same time indicates that turning right should be easier. Always check that opposing traffic has stopped before proceeding. If the full green is SRL telematics software replaced by an ahead or left-turn arrow, you must wait until the right-turn arrow shows before you turn right. At signalled roundabouts you MUST NOT enter the box unless you can cross over it completely without stopping.





